Mini Dremel

Mini Bench-Top Drill Press Approx 15" Tall. 120VAC (3) Speed.

2010-11-01T20:09:00.001-07:00

Review Mini Bench-Top Drill Press Approx 15" Tall. 120VAC (3) Speed.

Buy Cheap Mini Bench-Top Drill Press Approx 15" Tall. 120VAC (3) Speed. From Here Now!
This mini version has all of the big guy's abilities on a slightly reduced scale. Max working distance is approx 6". Chuck opens to 5/16", throw is 3/4". It's 120VAC, and has (3) speed ranges, up to 5000, 6,500, and 8000 rpm. Includes (2) Allen wrenches, chuck key, and, believe it or not, a pair of spare motor brushes.
Readmore

Technical Details

D482 - CRL 1/16" Collet for Dremel Mini-Mite Cordless Rotary Tool

2010-11-01T19:57:00.001-07:00

Review D482 - CRL 1/16" Collet for Dremel Mini-Mite Cordless Rotary Tool

Buy Cheap D482 - CRL 1/16" Collet for Dremel Mini-Mite Cordless Rotary Tool From Here Now!
C.R. LAURENCE D482 CRL 1/16" Collet for Dremel Mini-Mite Cordless Rotary Tool. This CRL 1/16" Collet used with the D750 Mini-Mite Rotary Tool accepts the DRL2020C Carbide Drill Bit and the ADK3D Diamond Drill Bit. These are used with the Aegis Windshield Repair Kit.. Part Numbers Variations: D482
Readmore

Technical Details

Dremel 670 Mini Saw Attachment

2010-10-19T13:07:00.001-07:00

Review Dremel 670 Mini Saw Attachment

Buy Cheap Dremel 670 Mini Saw Attachment From Here Now!
Mini Saw attachment for the Dremel MultiPro rotary tool. This unique attachment allows cuts through wood like never before. It attaches in seconds and makes clean, straight, perpendicular cuts up to 1/4 inch thick. Use for DIY, hobbies, crafts and modeling. Also cuts through paneling.
Readmore

Technical Details

- Mini-saw attachment for rotary tools; clear housing for better visibility
- Cut quickly and easily through wood up to 1/4 inch thick; straight, perpendicular cuts
- Clear plastic housing
- Includes 1 rotary tool attachment; rotary tool not included
- 2-year limited warranty
See more technical details

"Dremel saw" 2010-09-27
By Barry D. Gardner (Sandy, UT, US)
This is a great product for small jobs requiring a circular saw cut. I make small antique autos and trucks and this comes in handy when making the small parts.

"Broke the blade AND my Dremel" 2010-09-08
By J. L. Wong (Philadelphia)
I also overheated the attachment, the blade stuck inside and then shattered and it burned out my Dremel motor. Not recommended, except for masochists.

"Tiny but Effective" 2010-08-20
By Jim (Warner Robins, Georgia)
Nothing from Dremel is cheap, but these tools can do things in tight spaces where other tools cannot - and do it quietly!

"Utter garbage" 2009-12-29
By Jeff Barnes (Fort Mill, SC USA)
I originally bought this attachment to use in helping my son build his Pinewood derby car for Cub Scouts. This is a great tool so long as:

1) You don't need to cut more than, say, 3/4ths of an inch in length. Forget getting anything longer in anything like a straight line. You can't see where you're cutting, the grip is awkward, and it moves all over the place.

2) You don't need to cut anything more than 1/8th of an inch thick. Even then, expect the ultra-thin blade to bind like crazy.

3) You don't need to cut anything hard. Thin plywood? Pegboard? A dowel? Hard plastic? Don't even think about it. It might cut (partially) through some nice Chinese drywall or wet cardboard. Provided it doesn't bind first.

In short, I can't see a use for this attachment after trying and failing to use it in several different projects. Maybe you'll have better luck, but you should definitely think twice before purchasing it.

1/2" x 1/2" Mini Drum Sanding Kit

2010-10-04T11:20:00.001-07:00

Review 1/2" x 1/2" Mini Drum Sanding Kit

Buy Cheap 1/2" x 1/2" Mini Drum Sanding Kit From Here Now!

Readmore

Technical Details

4 pc. Mini Mounted Stone Set

2010-10-04T08:23:00.001-07:00

Review 4 pc. Mini Mounted Stone Set

Buy Cheap 4 pc. Mini Mounted Stone Set From Here Now!

Readmore

Technical Details

C.R. LAURENCE D482 CRL 1/16" Collet for Dremel Mini-Mite Cordless Rotary Tool

2010-10-04T08:17:00.001-07:00

Review C.R. LAURENCE D482 CRL 1/16" Collet for Dremel Mini-Mite Cordless Rotary Tool

Buy Cheap C.R. LAURENCE D482 CRL 1/16" Collet for Dremel Mini-Mite Cordless Rotary Tool From Here Now!
C.R. LAURENCE D482 CRL 1/16" Collet for Dremel Mini-Mite Cordless Rotary Tool. This CRL 1/16" Collet used with the D750 Mini-Mite Rotary Tool accepts the DRL2020C Carbide Drill Bit and the ADK3D Diamond Drill Bit. These are used with the Aegis Windshield Repair Kit..
Readmore

Technical Details

Proxxon 28174 24-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

2010-10-03T21:57:00.001-07:00

Review Proxxon 28174 24-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

Buy Cheap Proxxon 28174 24-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel From Here Now!
These high-performance band saw blades are extremely efficient and are very unlikely to break, even when being used for prolonged periods. Each band saw blade is alternately set with teeth in N-form, which are individually sharpened. This type of toothing provides oscillation-free operation of the saw blade, which is extremely important in order to obtain straight and clean cuts.
Readmore

Technical Details

Dremel 114-670-01: Mini Saw Attachments

2010-10-03T21:55:00.001-07:00

Review Dremel 114-670-01: Mini Saw Attachments

Buy Cheap Dremel 114-670-01: Mini Saw Attachments From Here Now!

Readmore

Technical Details

Proxxon 37172 MBS 115/E Micro Band Saw

2010-09-25T12:54:00.003-07:00

Review Proxxon 37172 MBS 115/E Micro Band Saw

Buy Cheap Proxxon 37172 MBS 115/E Micro Band Saw From Here Now!
A solid, ribbed die-cast aluminum housing (not a tubular or sheet metal construction) ensures the necessary stability. The machine has double ball bearing aluminum pulleys, a sturdy machined table with a slot for the miter gauge as well as the coolant trough. The worktable tilts up to 45° for accurate miter cuts. The low noise 110-120V motor (high quality, for quiet, prolonged use) operates via toothed belt. Electronically controlled speeds for exceptionally accurate cutting (no subsequent finishing necessary) are available from 395 to 820 ft/min. A practical table at the outside of the machine housing indicates the recommended speed for various types of material. The blade size of 13/64" x 1/64" (5.0 x 0.4 mm) is ideal for fine work, allowing to cut even smallest radii. The machine is equipped with a vacuum-cleaner adapter to help you work in a dust-free environment. Technical data: Speed 395 to 820 ft/min (with feedback control); Throat depth 5 29/32" (150 mm); Max. work piece height 3 13/32" (85 mm); Table Size 7 7/8" x 8 11/16" (200 x 220 mm)(adjustable from 0 to 45°); Volts 110-120V AC, 60 Hz; The machine comes with one 42" x 13/64" x 1/64" (1065 x 0,5 x 0,4 mm) band saw blade (14 TPI). Note: The cutting of glass and ceramics should only be attemted in conjunction with the coolant system.
Readmore

Technical Details

- Speed: 395 to 820 ft./minute (with feedback control)
- Throat Depth: 5-29/32 inch with maximum work piece height of 3-13/32 inch
- Table size 7-7/8 inch x 8-11/16 inch; 110-120V AC, 60 HZ
- Includes adapter to connect with vacuum cleaner
- Optional Coolant Kit, number 28188 available for wet cutting
See more technical details

"Great saw for small parts" 2009-08-01
By Sue
When i first got it out of the box i had my concerns,but once i started using it i was a believer.

Had this band saw for about 6 months and very happy with it .

Use it for brass pieces... tubes, rods,bar stock.Cut a 3 inch long cut 1/4inch thick brass bar stock and it worked like a dream. Slow steady feed with a lubricant and it came out great.

Would recommend to a friend!!!

"Poor quality, bad design." 2009-06-01
By Toxa P. (NJ United States)
The saw comes with the triple-bearing guide (# 28187) so you don't need to order it as an accessory as Amazon recommends. The band saw is very very light and must be bolted to the workbench to do any work. Even though the blade guide goes up to allow for 3" thick material, do not expect to do anything larger than 1/4" brass or aluminum. When I tried to feed 1/2" aluminum bar the saw really struggled and made sad noises. The saw quickly developed blade-tracking problems and more importantly it would refuse to to start without me manually giving the blade-wheels a push. And this is only after a few hours of operation! I tried to adjust and readjust to no avail, The saw just refuses to keep the blade tracking.

The table is machined aluminum and is pretty flat, However, the center of the table (where the blade exits) has a 1" square whole covered by red plastic. This cover sits about 1/16" lower than the surface of the table. It tends to catch on whatever you trying to cut. There's also no easy way to shim this up. This should have been brass, and allow for adjustment to be even with the table.

In addition, there is no ripping fence on the table or any provision for one. The single T-slot on the table is parallel to the direction of the cut and is positioned close to the blade. The single purpose of this slot is for the included miter gage. There's no way this can be used to fashion some semblance of a fence. I found myself just clamping a bar to the table for the purpose of a fence, which is a pain to adjust or keep parallel to the blade.

To conclude, I expected this to be a nice little saw for precise work on small parts. It fails to deliver. I would not recommend this to anybody.

Images Product

Buy Proxxon 37172 MBS 115/E Micro Band Saw Now
Buy Proxxon 37172 MBS 115/E Micro Band Saw |
Cheap Proxxon 37172 MBS 115/E Micro Band Saw | Low Price Proxxon 37172 MBS 115/E Micro Band Saw | Best Proxxon 37172 MBS 115/E Micro Band Saw | Order Proxxon 37172 MBS 115/E Micro Band Saw | Good Proxxon 37172 MBS 115/E Micro Band Saw | Lowest Proxxon 37172 MBS 115/E Micro Band Saw | Save Proxxon 37172 MBS 115/E Micro Band Saw | Discount Proxxon 37172 MBS 115/E Micro Band Saw | Purchase Proxxon 37172 MBS 115/E Micro Band Saw | Shop Proxxon 37172 MBS 115/E Micro Band Saw | Buying Proxxon 37172 MBS 115/E Micro Band Saw | Where Proxxon 37172 MBS 115/E Micro Band Saw

10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass

2010-09-25T12:54:00.001-07:00

Review 10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass

Buy Cheap 10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass From Here Now!
Here's a set of (10) tiny embedded-diamond files with round dipped handles, just in case you have some tiny embedded diamonds that need filing. The file portions are 1 mm to 2 mm wide, with assorted pointed-round, pointed-flat, and blunt-flat tips.
Readmore

Technical Details

- Works on all natural materials marble, wood, stone, bone etc.
- Soft PVC-dipped handles have excellent grip even when exposed to moisture and fluids
- Mini files for small and delicate applications
- Used in deburing,fixing chipped glass&tile,deling,many hobbies and professional applications
- Ten of the most-used file styles and sizes
See more technical details

"Mini diamond file set" 2010-05-14
By lapperoo (North Carolina)
These are the perfect files for metal clay to reach small, tight spaces. I love them! The assortment of shapes is a plus and the price was great.

"I agree with the two below me" 2009-03-07
By Mister Chief
The description is pretty nice, but what is nicer are these files. Wow, these are great. A bit hard to hold when filing for a while, but they work absolutely amazingly.

Before I bought them, however, I did not read the description and I thought they were actual hand size. A bit to my surprise when they arrived to see they were so small.

The size however did work to my advantage.

"Great Product Description!" 2009-01-19
By R. Dunlap
I heartily concur with J. Schoenfelder, but I think that description deserves 5 stars. I did a double take then let out a chuckle. I am going to buy this item actually, and I'll return here and let you know what I think for real ;)

Follow-up: Well. Like I said, I would return here and comment once I bought this product. The files are very good. For the price they are great. I would recommend these files to anyone that needs small files. I use these for my hobbies and have found they do the job better than the set they are replacing which cost twice as much.

So, I give this product 5 stars for the funny description, AND 5 stars for the product itself. I hope that helps!

Dremel 432 1/2" 120 Grit Sanding Bands 6 Pack

2010-09-25T12:44:00.001-07:00

Review Dremel 432 1/2" 120 Grit Sanding Bands 6 Pack

Buy Cheap Dremel 432 1/2" 120 Grit Sanding Bands 6 Pack From Here Now!
Dremel 432 1/2-Inch Fine Sanding Drum - Pack of 6
Readmore

Technical Details

- Ideal for rough-shaping and smoothing wood and fiberglass
- Removes rust from metal; shapes rubber surfaces
- Covered with aluminum oxide abrasive
- Features fine 120-grit sanding
- Measures 1/2 inch in thickness; pack of 6
See more technical details

"Better than expected" 2010-09-10
By Susan J. Tauro
We have a beagle and were trying to trim his nails with the pedi paws but it was so weak that it stops when you apply pressure so it would take us 30 minutes or more to trim his nails with two of us holding him down. He freeaks out at the clippers so we needed to only grind his nails down. Read alot of reviews on line and decided to purchase this dremel and it is even better than I expected. First of all it is so strong we only use it on low. We have only charged it once and have trimmed his nails 3 times already and still have full power, probably because it does the job so quickly. It's quiet so it doesn't freak him out, he actually dozes off when we're trimming and he doesn't pull away at all. He's 2 years old and trimming his nails was always a problem, we had to take him to the vet and she did it with a dremel. This is even better because it doesn't have a cord, which he was afraid of, that's why I ordered this rechargable one. Now, I call him over whenever I want to trim, he comes to me now problem relaxed, 5-10 minutes later he get his treat and it's done. If you need to, it is great for jobs in the house. It is definately as strong as the corded ones. I highly recommend this dremel.

"awesome" 2010-05-17
By Leilarose68
does what they say it does... i love dremel..forget that pedipaws device...dremel is so much better. you can use it for soooo much more

"Great package...will last a while!" 2010-03-24
By Stacy Grover
These bands work great for filing my dogs' nails. They get closer than clippers ever did! The package is nice because one band lasts us several weeks, so the package itself will last quite a while.

"Shipping high" 2010-02-01
By K. Hirsch (MN United States)
While the product itself seems fine, the shipping charged is ridiculous. The pieces weigh almost nothing - I'd rather that they just charge what they want to charge for the product and then charge a reasonable shipping rate. I would feel a lot better about the purchase, then.

Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

2010-09-23T07:39:00.001-07:00

Review Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

Buy Cheap Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool From Here Now!
We started counting all the uses for this little dynamo, but we stopped at 967. We like it for delicate tasks and finer work because it isn't as powerful as its big brothers, so it's easier to control. It's light, extremely maneuverable, the switch is exactly where you want it and heck, it's just plain fun to use. It's perfect for jewelry, electronics, tiny woodworking crafts like dollhouse furniture and other intricate hobbies. It uses Dremel's wide array of bits, so there's virtually no limit to what you can do with this. Sure, there are store brands on the market for less, but Dremel is king when it comes to rotary tools, and we think they outdid themselves with this one.
Readmore

Technical Details

- Cordless small rotary tool; compatible with Dremel bit accessories; 1/8-inch collet
- Small rotary tool ideal for delicate tasks and finer work; 2 speeds (6,500- 13,000 rpm)
- Lightweight plastic housing
- Includes rotary tool, sanding drum, small felt wheel, fine sanding band, carbide stone
- 8 inches long; 2 pounds; 2-year warranty
See more technical details

"Dremel Sander -- Excellent product" 2010-08-29
By James Seiler
Meets all the expectations. Perfect for my needs. I use it to trim my dogs nails. Received quickly -- works fine. Could not be more pleased. (And so is my pet!)

"Minimite rotary tool" 2010-08-23
By George R. Gavalas
We are using this tool to file extra toenail thickness from fungus-infected toenails. It has saved me from this obstinate problem. By removing extra thickness, the toenail is relieved, infection is averted. I had one for 10 years before the motor gave up. I just bought a new more powerful one at the same cost.

"Pretty good little tool." 2010-08-21
By Davejc
The Dremel is great for sharpening chainsaws, very quick and easy to get use to. The only draw back with the Minimite is that for 3 hours charge you only get 20 minutes of use in the high speed mode.

"So much better than clippers!" 2010-08-19
By chitownegrl (Chicago IL)
I bought this on the advice of the groomer who cut her nails. My amazing and sweet Aussie and I adopted each other 12 years ago. For 3 years before that -Whoever- had her should be thrown in jail. Her nails were Never cut, quicks longer than you could ever imagine, but I won't get into that now! I had been taking her to groomers to have her nails professionally cut for Years. I just didn't trust myself to successfully do this. Well, she would still bleed, even with the pros. And I would get yelled at by the groomers for her nails being like that. Once I mentioned she came from a shelter...So I did tons of research and found this item. Fantastic! After all my baby went through and all that she was afraid of even years later, she did not mind the noise at all. What a gal! One thing I read that is good advice- somehow (pantyhose, etc) cover the paw, stick nails thru, so the fur does not get in the way. When it does get caught- watch out! I've been using it for I think about a year now at least 2x a month and just now I'm going to buy replacement pads. Highly recommend! Love the fact it is cordless, I'll never use a corded one again.

Dremel Attachments & Accessories Collection

2010-09-18T15:22:00.001-07:00

Review Dremel Attachments & Accessories Collection

Buy Cheap Dremel Attachments & Accessories Collection From Here Now!

Readmore

Technical Details

Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment

2010-09-01T05:59:00.001-07:00

Review Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment

Buy Cheap Dremel 697-06 150-Piece Rotary Tool Super-Accessory Assortment From Here Now!
No need to buy those Dremel accessories piecemeal, this kit contains 150 rotary tool attachments for cutting, grinding, sanding, polishing, drilling, sharpening, cleaning, and more! With five aluminum and silicone grinding stones, two polishing wheels, sanding discs, drums, bands, and mandrels, plus cut-off wheels large and small, you’ll be fully armed for any maintenance project, craft challenge, or repair that comes your way. The tool box keeps accessories organized for easy access. --Brian D. Olson

What’s in the Box

High-Speed Cutter

1 - 405 Brush Cup

1 - 428 1/2-inch Felt Polishing Wheel

9 - 414 1/2-inch Felt Polishing Wheel

1 - 802 Plastic Polishing Compound

1 - 429 Felt Wheel

1 - 407 60 grit Sanding Drum & Mandrel

4 - 408 60 grit Sanding Bands

24 - 411A Coarse Sanding Discs

24 - 412 Sanding Discs

24 - 413 Sanding Discs

20 - 409 Cut-off Wheels

4 - 432 1/2-inch 120 grit Sanding Bands

1 - 150 1/2-inch Drill Bit

2 - 401 Mandrel

1 - 402 Mandrel

1 - 90962 Wrench

20 - 420 Heavy-duty Cut-Off Wheels

5 - 426 1-1/4-inch Cut-off Wheels

1 - 8193 5/8-inch Aluminum Oxide Grinding Stone

1 - 84922 3/16-inch Silicone Carbide Grinding Stone

1 - 85422 25/32-inch Silicone Carbide Grinding Stone

1 - 932 3/8-inch Aluminum Oxide Grinding Stone

1 - 952 3/8-inch Aluminum Oxide Grinding Stone
Readmore

Technical Details

- 150-piece rotary tool accessory kit with handy organizer
- Use with all Dremel rotary tools
- Durable plastic storing case with transparent top for quick identification
- Includes Tools for cutting, grinding, polishing, sanding, drilling, sharpening, cleaning, and more
- 1-year warranty
See more technical details

"Good Buy if Your Dremel Case Is Depleted" 2010-08-03
By Tom D (Columbus, OH United States)
This is a good buy if you don't use the EZ-Lock system and you've lost or damaged a lot of your basic tools. If you do a lot of a particular task, like polishing or metal cut off, you're better off buying just the pieces you need.

I leave a Dremel at a shared cottage and last time I opened the case nothing was there but the Dremel and one arbor, so this is what I bought to re-establish the kit. Happy, and I'm locking it up.

"I like to keep it short" 2010-07-18
By Nutz (NYC)
An excellent expansion...on the accessories contained in a stock dremel kit.

Points of interest:

Large quantity of cutting/sanding/grinding wheels

SOME very useful individual pieces.

Points of contention:

Part count includes many multiples of the same items. Im not so sure that everybody needs 3 dozen sanding discs.

it would be nice if some of the more robust cutter accessories were included.

oh god the case! what a poor use of space! luckily the part trays can be removed. eventually i shall relocate them.

"fantastic" 2010-06-28
By Shirley R. Nichols
Good buy I'm so glad I bought it in our small town it's hard to find dremel tools it been very handy to have

"Good Deal" 2010-04-14
By Doug P. Seeger (Michigan)
Product was exactly as explained and has just about everything you could need for a Dremel. This product will go great with a new Dremel. tool or at least give you basics that you can add to later. I recommend this to anyone looking into a new Dremel.

1/2" x 1/2" Mini Drum Sanding Kit

2010-08-31T08:41:00.001-07:00

Review 1/2" x 1/2" Mini Drum Sanding Kit

Buy Cheap 1/2" x 1/2" Mini Drum Sanding Kit From Here Now!

Readmore

Technical Details

Proxxon 28729 3-1/8" x 1/32" x 3/8" Synthetic Resin Bonded Cut-Off Wheel

2010-08-23T07:46:00.007-07:00

Review Proxxon 28729 3-1/8" x 1/32" x 3/8" Synthetic Resin Bonded Cut-Off Wheel

Buy Cheap Proxxon 28729 3-1/8" x 1/32" x 3/8" Synthetic Resin Bonded Cut-Off Wheel From Here Now!
For cutting wood, steel, non-ferrous metals and plastics.
Readmore

Technical Details

Rotary Tool Keyless Chuck

2010-08-23T07:46:00.005-07:00

Review Rotary Tool Keyless Chuck

Buy Cheap Rotary Tool Keyless Chuck From Here Now!
This keyless chuck allows you to change bits in your Dremel or other high speed rotary drill without changing collets. NOTE, this will NOT fit any of the cordless Dremel models or 280 and 300 series Dremels.
Readmore

Technical Details

- Designed to fit high speed rotary tools
- 0- 1/8" capacity
- will not fit any Cordless Dremel models or Dremel 280 and 300 series
See more technical details

"Freedom at last!" 2006-08-17
By Suzanne (Newtown, CT USA)
Forget about collets and nuts. Get a keyless chuck. You don't need to fumble around trying to find the right collet; the keyless chuck works just like a drill chuck - it opens / closes to the correct size without changing a collet. You won't believe the time and frustration you will save.

Images Product

Buy Rotary Tool Keyless Chuck Now
Buy Rotary Tool Keyless Chuck |
Cheap Rotary Tool Keyless Chuck | Low Price Rotary Tool Keyless Chuck | Best Rotary Tool Keyless Chuck | Order Rotary Tool Keyless Chuck | Good Rotary Tool Keyless Chuck | Lowest Rotary Tool Keyless Chuck | Save Rotary Tool Keyless Chuck | Discount Rotary Tool Keyless Chuck | Purchase Rotary Tool Keyless Chuck | Shop Rotary Tool Keyless Chuck | Buying Rotary Tool Keyless Chuck | Where Rotary Tool Keyless Chuck

4 pc. Mini Mounted Stone Set

2010-08-23T07:46:00.003-07:00

Review 4 pc. Mini Mounted Stone Set

Buy Cheap 4 pc. Mini Mounted Stone Set From Here Now!

Readmore

Technical Details

Rotary Tool - 44" Flex Shaft - Grinder - 40 Pc - UL

2010-08-23T07:46:00.001-07:00

Review Rotary Tool - 44" Flex Shaft - Grinder - 40 Pc - UL

Buy Cheap Rotary Tool - 44" Flex Shaft - Grinder - 40 Pc - UL From Here Now!
An outstanding value in a high-quality version of the incredibly useful electric rotary tool--one tool that does so many things well (we consider it to be one of the most essential tools for any shop or home toolkit). Just by changing accessories it converts to a mini die-grinder, polisher, buffer, power cleaner, saw, drill, sander and router for use on just about any material. For really tight fits, the extra-long flex-shaft micro-grinder quickly attaches and gives you a power tool only slightly larger than a fountain pen. Powerful 130-watt UL-listed motor with finger-tip variable speed of 8,000 to 30,000 RPM; separate on/off switch so you don't have to reset speed. 40-piece accessory set includes sanding drums and wheels, buffer wheels, drill bits, grinding stones of various shapes and cut-off wheels. Custom-fit latched storage and carry case keeps all organized and ready for the next job.
Readmore

Technical Details

1/8" Mini Drill Saw

2010-08-23T07:44:00.001-07:00

Review 1/8" Mini Drill Saw

Buy Cheap 1/8" Mini Drill Saw From Here Now!

Readmore

Technical Details

Proxxon 28176 14-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

2010-08-23T07:24:00.003-07:00

Review Proxxon 28176 14-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

Buy Cheap Proxxon 28176 14-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel From Here Now!
These high-performance band saw blades are extremely efficient and are very unlikely to break, even when being used for prolonged periods. Each band saw blade is alternately set with teeth in N-form, which are individually sharpened. This type of toothing provides oscillation-free operation of the saw blade, which is extremely important in order to obtain straight and clean cuts.
Readmore

Technical Details

Proxxon 28174 24-Tpi Fine Toothed Band Saw Blade for MBS 115/E Swedish Steel

2010-08-23T07:24:00.001-07:00

Technical Details

Dremel 300-1/24 300 Series Variable-Speed Rotary Tool Kit

2010-08-19T21:26:00.001-07:00

Review Dremel 300-1/24 300 Series Variable-Speed Rotary Tool Kit

Buy Cheap Dremel 300-1/24 300 Series Variable-Speed Rotary Tool Kit From Here Now!
Includes:

• 300 Series Variable Speed Rotary Tool
• Circle Cutter Attachment
• 191 High Speed Cutter
• 401 Mandrel
• 402 Mandrel
• 403 Bristle Brush
• 407 Coarse 1/2" Sanding Drum
• 414 Small Felt Wheels (2)
• 420 Heavy Duty Emery Cut-Off Wheel (2)
• 421 Polishing Compound
• 422 Cone Polishing Tip
• 426 1-1/4" Fiberglass-Reinforced Cut-Off Wheel
• 428 Carbon Steel Brush
• 429 Large Felt Wheel
• 430 Coarse 1/4" Sanding Drum
• 432 1/2" 120 Grit Sanding Band
• 438 1/4" 120 Grit Sanding Band
• 442 Carbon Steel Brush
• 540 1-1/4" Cut-Off Wheel
• 561 MultiPurpose Cutting Bit
• 932 Aluminum Oxide Grinding Stone
• 952 Aluminum Oxide Grinding Stone
• 8193 5/8" Aluminum Oxide Grinding Stone
• 85422 Silicon Carbide Grinding Stone
Readmore

Technical Details

- Variable speed from 5,000 to 35,000 rpm
- Lightweight design for comfort during prolonged use
- Comfort grip housing for easier handling and better tool control
- "Dove-tail" feature for Dremel-exclusive attachments
- Click-and-set on/off switch allows precise speed selection
See more technical details

"Dremel 300-1/24 300 Series Variable-Speed Rotary Tool Kit" 2010-07-11
By Olivier Martinez
i think you need the Variable speed from 5,000 to 35,000 rpm

i tried the other one and it was on full speed all the time

so i could not adjust the speed for the job i wanted to do

and actually the speed of 35.000 rpm is very high ,

so if you are ok with that buy the other one .

but i returned the old one and bought this one with full

Variable speed from 5,000 to 35,000 rpm and it is actually perfect .

"The only variable in the speed is on or off" 2010-07-11
By Steven S. Nelson (Northern Indiana)
I have had two of these in a week, both returned. The switch is a big piece of crap, the first one lasted one day before all it would do was to turn it on and off. I returned it and got another, it lasted two days before doing the same thing, I guess by variable speed they mean on and off, so I have no idea why the switch has multiple settings. I really like the shape and balance of this tool, very easy to use, its a shame they forgot about quality when cost cutting. The tool has a four year warranty, but the switch can't make it past day two, no more Dremel for me. I will try the B&D or Proxxon version, I'm sure either one will last more than two days.

"Disappointed" 2010-07-06
By Wanda Whirley (Kentucky, USA)
Sorry to offer negative remarks, but I was so excited to find this Dremel at a good price for my husband's birthday and disappointed at it's performance. When he first started it up, it vibrated and was so noisy he was ready to ship it back. He's had Dremel's before and always satisfied, just about wore his old one out. So don't know what the problem was, maybe just a lemon because the Dremel product has always been good. Just not this one.

"Works like I would expect it to" 2010-04-23
By B. Stogsdill
I bought this dremel for a very specific work related purpose. It is basically required for performing repairs on my laboratory equipment. Anyway, it works well, and even though it gets wet and covered with aluminum oxide, it has stayed working and in good condition. If you need this tool, you know why you need this tool and nothing I say will really change it. If you don't know what it is, chances are you don't need it. Basically, it is a low torque turning motor, used for polishing, shaving, and sanding small items, like fine details on something or assembly of small models. It comes with a nice set of tools, most of which I won't ever use. However, it is a decent tool and I got it at a decent price compared to the retail stores.

Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool

2010-08-18T13:45:00.001-07:00

Review Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool

Buy Cheap Dremel 8000-03 10.8-Volt Lithium Ion Cordless Rotary Tool From Here Now!
Remember how cool we all thought that first Dremel was? We're reliving the feeling with this one: lighter, faster, smarter, better, and stronger. The main improvement over the last generation is the battery source: lithium-ion. There are so many reasons to applaud. Lithium holds its charge up to six times longer in storage than nickel-cadmium batteries, so it's ready when you are. Remember the disappointment when you were ready and your battery was low? That won't happen with this one. It's got a battery fuel gauge that tells you how much life is left before a recharge, so you won't be caught without your Dremel, and if you choose to keep it on its charger, you won't cause memory and shorten the charge capacity. It's small, it's light, it's comfortable and maneuverable; it's everything the corded models are, but without the cord. We love it.--Kris Jensen-Van Heste
Readmore

Technical Details

- Lithium-ion battery holds charge while in storage for two years so light is always ready when you need it
- Includes 40 genuine Dremel accessories
- Variable speed from 5,000 to 35,000 rpm to match the proper speed required
- High capacity 10.8V Lithium-ion battery for longer run times
- Comfort grip housing for easier handling and better tool control
See more technical details

"Great tool for many jobs" 2010-07-28
By Emmit Fitts Humes (Miami, FL)
The Dremel is a terrific tool to keep handy. This specific model has all the power you need in a cordless Dremel. It easy handled all the tasks I have asked it to do, including cutting plywood with an attachment I purchased separately.

"DREMEL 8000-03 10.8-V CORDLESS" 2010-07-27
By Calvin H. Long (HI , USA)
Have not use this tool much since it's a spare unit but it feels solid and strong enough to handle minor tasks ,especially when you're away from AC outlet ! My main concern is about the Lithium Ion battery can be able to hold the charge while in storage ! With the sale price and most of positive reviews before purchase ,i am happy with the unit !

"Maybe one of the best purchases I have ever made" 2010-07-23
By BostonMan (Boston)
I could go on an on and on about how much I love my Lithium Dremel. It just sits in the closet all charged up for whenever I need it and does all sorts of stuff. I won't go into the stuff that others have probably already said about this device, but I would recommend that people (particularly apartment dwellers) purchase the Lithium powered one with an extra battery. Just keep it charged up and you will use it for random little things all the time. Oh and its really fun to use too...just wear your safety glasses!

"Everyone has their own experience" 2010-07-22
By J. M. Davison (Davenport, IA, US)
First off, everyone will have their own experience with this device, so I wanted to make it perfectly clear that I am not agreeing or disagreeing with any of the other reviewers. In my experience with the Dremel 8000-03 10.8v model, I have had nothing but success with it. I use it for many various jobs around the house (i.e. trimming the dog's nails, polishing brass, drilling pilot holes, removing stubborn nails or screws, woodworking projects, etc). While I think this device is perfect for these types of jobs, I do not see it being durable enough or built for cutting massive sheets of drywall, sanding an entire table all at once, and so on. It has a great amount of speed and power and so many attachments you just don't even know what all this thing can do. I do agree with one thing another reviewer that said, which is that some of the attachments are a mystery. They are color-coded in the instruction manual as to their function (i.e. cutting, sanding, etc) but it does not tell you what specifically you would use some of them for or what materials they will are sufficient to be used on. I have found that going to purchase attachments and bits for it at the store or on each individual Amazon product page, you can learn a little bit more specifically what its intended use is. The battery life is average, lasting a combined run time of about one hour, which should be sufficient for most jobs. If it runs out, you can recharge it in about two hours based on my experience.

If you are looking for a useful and multi-purpose power tool that will do just about any strange or small task you can think of, but are not going to rely on it to be your only power tool used for a job, then I would definitely recommend purchasing this unit. If you need it for large jobs or are going to use it continuously for long periods of time, you may want to consider a corded unit. Hope this review was neutral enough to provide enough information to make an informed purchasing decision. Thanks!

MAGLITE LM2A001 Replacement Lamp for AA Mini Flashlight, 2-Pack

2010-08-17T14:28:00.001-07:00

Review MAGLITE LM2A001 Replacement Lamp for AA Mini Flashlight, 2-Pack

Buy Cheap MAGLITE LM2A001 Replacement Lamp for AA Mini Flashlight, 2-Pack From Here Now!
Package of 2 light bulbs. Fits Maglite AA series flashlights
Readmore

Technical Details

- Package of 2 light bulbs for Maglite AA and AAA series flashlights
- Vacuum sealed for optimal longevity
- Extremely bright
- Energy efficient for extended battery life
- Easy to replace burned-out bulb
See more technical details

"Does what it was meant to do." 2010-07-15
By C. Boyer
I needed this for my mini mag light that had both bulbs burned out and this was exactly what I needed. The only complaint I have is that at the time of purchase the price was around $5, which is practically the cost of a new mini mag light that comes with 2 bulbs. It just seems almost better to buy a new light instead of a bulb these days. Overall, it's a great bulb and a good company.

"Maglite Replacement Lamps" 2010-03-29
By Ren Worlock (Branford, FL)
This is stupid. Why does amazon.com ask people to review things like this? Can't they develop software to skip replacement parts? The first bulb I took out of the package works great! In two or three years, if I can find the other bulb when I need it, I'll update this review.

"Bulbs" 2010-01-24
By Dan (New York)
It is what it is. Ya might get this cheaper at the hardware store, but at least I didn't have to drive.

"little lite but brite" 2009-10-21
By B. Hall
everyone has had a mag lite at one time or another so you know how good they are , to be so little and have such a brite shine is great. so use your lite for good purposes and have a lite night.

Belkin BZ103050vTVL Mini Surge Protector/Dual USB Charger

2010-08-17T01:17:00.003-07:00

Review Belkin BZ103050vTVL Mini Surge Protector/Dual USB Charger

Buy Cheap Belkin BZ103050vTVL Mini Surge Protector/Dual USB Charger From Here Now!
Hotel rooms and airport terminals never seem to have enough power outlets to charge all the devices today¿s traveler brings along. Now you can add outlets and peace of mind on business trips and vacations with the Belkin Mini Surge Protector. This new design features three AC outlets and two powered USB outlets* - perfect for MP3 players and mobile phones. * Important: This product¿s USB outlets cannot be used as a USB hub and does not transmit data. The powered USB outlets on this unit are intended solely for charging devices that can be charged via a USB interface
Readmore

Technical Details

- 360-degree rotating plug with 4 locking position
- Provides complete surge protection through all outlets
- Offers compact, lightweight, efficient design
- Features mini-USB cable to charge virtually any USB device¿including BlackBerry® and Motorola® RAZR phones
- Comes with Lifetime Product and $75,000 Connected Equipment Warranties
See more technical details

"Great charger" 2010-07-19
By Gadget Lover (USA)
I have used this for over a year and half, and it has come in handy on many trips where I have limited outlets. This easily expands on the outlets, and also handily charges my usb enabled devices, such as cellphones / iphone / ipod touch.

Very handy to have, and I highly recommend this charger / outlet extender.

"Misleading but I still am buying another one." 2010-07-10
By Nate
It "Comes with Lifetime Product and $75,000 Connected Equipment Warranties" as you can find on Belkin.com, but as some pictures show, the stabilizer piece does not work. It would work if the wall outlet face was flush with the wall. I can't say much about how well it is to take with yo on the go but I have been charging my iPod Touch, my Phone (not the iPhone because they are only on AT&T which sucks more than Verizon) and my MacBook Pro along with my Time Capsule. I would like it if the USB ports were on the bottom or the side because they are in the way of the other wall plugin when it is rotated to hang vertically.

I still am going to get another one.

"Warning--Does not work with all phones" 2010-07-07
By M. Wood (California, USA)
I have tried two of these Belkin surge protectors/USB chargers and they will not charge my Verizon phone. The phone gives an error message and refuses to charge. After some research, I found this is a known problem with CDMA phones. The unit does not provide enough current to charge these devices. Shame on Belkin for advertising this as being able to charge cell phones, which is the principle reason I bought it. Belkin tech support was useless here.

"Nice surge protector but not enough USB power" 2010-07-02
By Ealifer (San Diego, CA USA)
This is a nice plug-strip / surge protector. I use it for travel all the time. The integrated USB charging ports cuts down on the number of transformer bricks I need to plug in.

One issue I have is the spacing of the plugs is too close to allow use of transformer plugs without blocking outlets and the USB charging ports do no deliver enough current to charge the iPad.

Belkin Mini Surge Protector Dual USB Charger

2010-08-17T01:17:00.001-07:00

Review Belkin Mini Surge Protector Dual USB Charger

Buy Cheap Belkin Mini Surge Protector Dual USB Charger From Here Now!
MINI SURGE/USB CHARGER * 918J;$75KCEW;3OT;2 USB - This new design features three AC outlets and two powered USB outlets - perfect for MP3 players and mobile phones (retail)
Readmore

Technical Details

- 360-degree rotating plug with 4 locking position
- Provides complete surge protection through all outlets
- Offers compact, lightweight, efficient design
- Features mini-USB cable to charge virtually any USB device including BlackBerry® and Motorola® RAZR phones
- Comes with Lifetime Product and $75,000 Connected Equipment Warranties
See more technical details

"Great Mini Surge with USB Charger" 2010-08-16
By Deborah Culp-Hook
I used the Belkin mini surge protector with USB charger for the first time while traveling last week. Great little product - I could charge my laptop, my cell phone, and my mp3 player while I slept with no worries. The only issue I had was the placement of the USB plugs. I was a guest in someone's home and they had lighting and clock and television plugged into the bedroom outlets. Due to the mini surge protector unit needing to be plugged into the bottom of the 2 outlets most accessible for me, the clock plugged in above had to be unplugged to allow the USB charging units to be utilized. It wasn't a big issue because I plugged the clock into one of the mini surge protector outlets, but I thought it would have been more convenient if they had placed the USB chargers on the side if possible, so I wouldn't have needed to mess with the homeowner's clock (resetting the time, etc.).

Other than that one tiny design issue, this is a great thing to have. I've added it to my laptop bag to have for all future travel!

"iPhone charger? Look no further" 2010-08-14
By MGMc in Philly (Pennsylvania)
I read some reviews about how this is not a very compact travel companion. Maybe. I mean you can tell how big it is from the photo, unless you are not familiar with the size of an outlet.

But, SO WHAT? This thing is a surge protector with three outlets and two USB outlets. Think about that for a minute. $11 (when I bought) for an iPhone/Blackberry/headset/whatever charger? Come on, each of those chargers cost $30 each. You already have the cables, or can pick them up from someone here for $2.

In any event, I just went on a trip and charged an iPhone and Kindle, then switched to charge my wife's Blackberry and an iPad (yes, it will only slow charge and tell you it is not charging, but it is charging). I plugged the coffee maker into the outlet on it (the last part is not true, but just to make a point!).

"Secret to Rotating Plug & 1/2 amp charging" 2010-08-14
By Loving Gma (San Francisco Bay Area)
I have received 3 of these. The first one I returned because I could not rotate the male plug to reorient the charger. At first, the 3rd one I received didn't rotate either, although it would "wiggle" when I pushed in the white "release button." I then got a pair of pliers and GENTLY rotated the plug while pushing the release button. I then rotated the plug back and forth, and the plug then loosened up.

Note the Belkin specs page ([...]) indicates only 0.5 amp comes out the USB port. See the other review about getting a special cable to charge your phone if it requires a "work around" the phone's special USB port requirement.

I like this, and gave my 2nd one away to a friend to charge her ipod.

"Versatile surge protector that charges all my USB devices" 2010-08-13
By William Costley (Tucson, AZ)
This is a great little device. Okay--it's not so "little," as many other reviewers have commented on, but its size has also been exaggerated. I throw it in my backpack when I travel and it's never a nuisance. I included "versatile" in my headline because this unit does three things quite well:

1. Converts one AC outlet into three without taking up too much space.

2. Turns an AC outlet into a dual USB charger.*

3. Protects anything you plug into it from surges.**

*Many other reviewers are disappointed that they are not able to charge their USB devices with this (phones in particular). Well, I was in that camp too, as my Motorola VE20 would report "unauthorized charger" when I plugged a standard micro USB cable into it and refuse to charge it. However, I discovered that is NOT the Belkin's fault--it is Motorola's fault for putting a proprietary USB interface into their phones. After purchasing this Rocketfish charging cable Rocketfish RF-CA1MR - Cellular phone charging cable - USB - 4 pin USB Type A (M) - cellular phone connector (M) - 1.5 ft, I no longer have any problem charging my phone (hint: these cables are available all over FleeBay for cheap). If you already have one of these Belkins and it won't charge your USB device, try and find out if there's a special cable you need. One other thing about these: data cables they AIN'T, so don't expect to transfer anything but power with them--just use a standard USB cable for that. By the way, I'm not trying to blame the consumer for not knowing this. Belkin should put some kind of indication on the package that many devices require special USB cables to charge with this surge protector.

**As some other astute reviewers have mentioned, the clamping voltage is 800V--this means that the surge protector will stop sending current to anything plugged into it when the voltage climbs to 800V. Unfortunately this is way too high (UL certification typically requires a clamping voltage of no more than 330V, so I don't know how this thing got certified). I hope not to find out, but I fear that if this device experiences a surge it will fry anything plugged into it before the clamping voltage is reached. If anybody has any information on this (especially if you can prove me wrong), I'd love to see a comment!

BOTTOM LINE: I love this for travel, because it ensures I have enough outlets for my devices and I can leave my other USB chargers at home (as long as I remember to bring the right cables, of course).

5 Pc. Multipurpose Cutting Bits

2010-08-16T08:37:00.003-07:00

Review 5 Pc. Multipurpose Cutting Bits

Buy Cheap 5 Pc. Multipurpose Cutting Bits From Here Now!

Readmore

Technical Details

Proxxon 28729 80mm Cut Off Wheels for KGS 80

2010-08-16T08:37:00.001-07:00

Review Proxxon 28729 80mm Cut Off Wheels for KGS 80

Buy Cheap Proxxon 28729 80mm Cut Off Wheels for KGS 80 From Here Now!
For cutting wood, steel, non-ferrous metals and plastics.
Readmore

Technical Details

5/8" Flap Wheel

2010-08-14T06:28:00.001-07:00

Review 5/8" Flap Wheel

Buy Cheap 5/8" Flap Wheel From Here Now!

Readmore

Technical Details

1" Flap Wheel

2010-08-13T18:24:00.001-07:00

Review 1" Flap Wheel

Buy Cheap 1" Flap Wheel From Here Now!

Readmore

Technical Details

- 1/8" shank, can be used with Dremel, Craftsman, and most other Rotary Tools
- 1" diameter
- For sanding & polishing flat & contoured surfaces
- For use on wood, plastic, or metal
See more technical details

Images Product

Buy 1" Flap Wheel Now
Buy 1" Flap Wheel |
Cheap 1" Flap Wheel | Low Price 1" Flap Wheel | Best 1" Flap Wheel | Order 1" Flap Wheel | Good 1" Flap Wheel | Lowest 1" Flap Wheel | Save 1" Flap Wheel | Discount 1" Flap Wheel | Purchase 1" Flap Wheel | Shop 1" Flap Wheel | Buying 1" Flap Wheel | Where 1" Flap Wheel

3/16" Chainsaw Sharpening Stone

2010-08-11T00:26:00.001-07:00

Review 3/16" Chainsaw Sharpening Stone

Buy Cheap 3/16" Chainsaw Sharpening Stone From Here Now!

Readmore

Technical Details

C.R. LAURENCE D482 CRL 1/16 Collet for Dremel Mini-Mite Cordless Rotary Tool

2010-08-08T09:38:00.001-07:00

Review C.R. LAURENCE D482 CRL 1/16 Collet for Dremel Mini-Mite Cordless Rotary Tool

Buy Cheap C.R. LAURENCE D482 CRL 1/16 Collet for Dremel Mini-Mite Cordless Rotary Tool From Here Now!
C.R. LAURENCE D482 CRL 1/16 Collet for Dremel Mini-Mite Cordless Rotary Tool. This CRL 1/16" Collet used with the D750 Mini-Mite Rotary Tool accepts the DRL2020C Carbide Drill Bit and the ADK3D Diamond Drill Bit. These are used with the Aegis Windshield Repair Kit..
Readmore

Technical Details

Proxxon 28186 Diamond Blade for MBS 115/E

2010-08-08T09:13:00.001-07:00

Review Proxxon 28186 Diamond Blade for MBS 115/E

Buy Cheap Proxxon 28186 Diamond Blade for MBS 115/E From Here Now!
These high-performance band saw blades are extremely efficient and are very unlikely to break, even when being used for prolonged periods. Each band saw blade is alternately set with teeth in N-form, which are individually sharpened. This type of toothing provides oscillation-free operation of the saw blade, which is extremely important in order to obtain straight and clean cuts.
Readmore

Technical Details

1 3/4" Diamond Wheel

2010-08-07T04:47:00.001-07:00

Review 1 3/4" Diamond Wheel

Buy Cheap 1 3/4" Diamond Wheel From Here Now!

Readmore

Technical Details

Mini Bench Buffer & Polisher - Var. Speed - 3" Wheels

2010-08-06T07:17:00.001-07:00

Review Mini Bench Buffer & Polisher - Var. Speed - 3" Wheels

Buy Cheap Mini Bench Buffer & Polisher - Var. Speed - 3" Wheels From Here Now!
An essential tool for professional jewelers and other artisans, this great little polisher/buffer has dozens of practical uses at home or in almost any workshop. Great for putting mirror shine on chrome, gold/silver, stainless steel and other metals with minimal effort. Infinitely variable speed control lets you select best speed for each job. Works with a variety of wheel-types; sewn cloth, wool, fiber or synthetic. Tapered screw-type spindle design accepts 3" diameter wheels with arbor holes 1/4" - 1/2". Threads run opposite motor direction so wheels thread on almost by themselves; rotational force keeps them securely in place (just make sure L & R spindle adapters are on the correct sides!)
Readmore

Technical Details

10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass

2010-08-05T07:02:00.001-07:00

Technical Details

Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth

2010-08-04T07:28:00.001-07:00

Review Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth

Buy Cheap Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth From Here Now!
Extremely clean cutting edges when cutting balsa wood, plywood or soft wood as well as glass-fiber reinforced plastics (GRP) because of large number of teeth. May also be used for cutting hard wood, POLYCARBONATE, plastics and aluminum. Also fits Circular Table Saw FKS/E.
Readmore

Technical Details

- May also be used for cutting hard wood, polycarbonate, plastics and aluminum
See more technical details

Proxxon 38526 BBS Belt Sander

2010-08-03T09:42:00.001-07:00

Review Proxxon 38526 BBS Belt Sander

Buy Cheap Proxxon 38526 BBS Belt Sander From Here Now!
With powerful special DC motor, quiet and long-lasting. The sanding belt is located flush on the left side to allow surfaces to be sanded "right down to the corner". Fine adjustment for the rollers prevents running off on the side. Spring clamping system for easy replacement of belts without tool. Housing made of fibreglass reinforced POLYAMIDE. Complete with screw clamp and 5 each 120 grit and 240 grit sanding belts. Technical data:110 - 120 V. 1/5 hp (150 W). Sanding belt 1 37/64" x 10 7/16" (40 x 265 mm). Sanding surface 2 23/64" x 1 37/64" (60 x 40 mm). Belt speed 525 ft/min (160 m/min). Weight 1.5lb (700 g).
Readmore

Technical Details

- Comes with 5 each 120 and 140 grit belts; blow molded storage case and clamp for stationary use on workbench
- 110-120VAC, 60 HZ, .2hp (150W) belt speed 525 feet per minute
- Weighs 1.54 pounds
- Replacement belts, set of 5 each: 28922, 80 grit; 28924 120 grit; 28926 180 grit; 28928 240 grit
See more technical details

"Changing belts!" 2010-07-29
By lee
The sander works well enough when you get the belt on. It is hard to push that little lever on the side to change the belt. Yoy have better luck pushing in the front rollers.

"Great sander, perfect size" 2009-10-27
By Steven L. Sorensen (Utah)
This is a GREAT sander, about half the size and weight of a regular belt sander, but with plenty of power to get the job done. It sands flush on one side to get into the hard to reach places, and as it fits perfect in the palm of your hand it does not tire you. The action is very effective in sanding flat and even and changing belts just takes a few seconds. This is a great tool as are the other Proxxon tools I have bought.

Images Product

Buy Proxxon 38526 BBS Belt Sander Now
Buy Proxxon 38526 BBS Belt Sander |
Cheap Proxxon 38526 BBS Belt Sander | Low Price Proxxon 38526 BBS Belt Sander | Best Proxxon 38526 BBS Belt Sander | Order Proxxon 38526 BBS Belt Sander | Good Proxxon 38526 BBS Belt Sander | Lowest Proxxon 38526 BBS Belt Sander | Save Proxxon 38526 BBS Belt Sander | Discount Proxxon 38526 BBS Belt Sander | Purchase Proxxon 38526 BBS Belt Sander | Shop Proxxon 38526 BBS Belt Sander | Buying Proxxon 38526 BBS Belt Sander | Where Proxxon 38526 BBS Belt Sander

Proxxon 37172 MBS 115/E Micro Band Saw

2010-08-02T08:42:00.001-07:00

Technical Details

Dremel EZ688-01 EZ Lock Mini Cutting Kit for Metal and Plastic

2010-08-01T07:45:00.005-07:00

Review Dremel EZ688-01 EZ Lock Mini Cutting Kit for Metal and Plastic

Buy Cheap Dremel EZ688-01 EZ Lock Mini Cutting Kit for Metal and Plastic From Here Now!
Dremel EZ688-01 EZ Lock Mini Cutting Kit for Metal and Plastic
Readmore

Technical Details

SE 10 HSS Mini Router Bits Rotary Drill Tools fits Dremel

2010-08-01T07:45:00.003-07:00

Review SE 10 HSS Mini Router Bits Rotary Drill Tools fits Dremel

Buy Cheap SE 10 HSS Mini Router Bits Rotary Drill Tools fits Dremel From Here Now!
10 Mini Router Bits for Carpentry. This is a new set of 10 mini router bits. Great for carpentry. These bits are made of high speed steel and are titanium coated. They can be used with a Dremel tool. Each has a 1/8" (3 mm) shank. We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.
Readmore

Technical Details

Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

2010-08-01T07:45:00.001-07:00

Review Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool

Buy Cheap Dremel 750-02 Minimite 4.8-Volt Two-Speed Cordless Rotary Tool From Here Now!

Designed for drilling, sanding, shaping, detailing and other light-duty jobs, this compact, go-anywhere, use-anytime tool comes in extremely handy in and around the house. It features two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank.

Readmore

Technical Details

"Clipper" 2010-07-30
By Mair (Bohemia, NY USA)
Just what I needed! I bought the Pet Paw and used it for my smaller dog. I wasn't good for the lareger one. I researched and found this Dremel. What a great tool! And I used it to smooth out a chip in my cyrstal stemware!

"great tool for grooming dog nails" 2010-07-14
By foosha
The dremel is the best way to trim back my pet's nails with out any trauma to the dog or myself. No more worries about cutting the quick!

"Great product; great price" 2010-07-05
By Novice Handy-Person
I'm not an experienced handy-person but this dremel is a very handy tool to have around the house.

There are many different useful attachments you can purchase for just about any application.

This is a very basic kit but if you feel that after using it for some time you are going to be doing more involved,

professional work then you can step up to the more heavy duty machines.

"Great tool at a great price" 2010-06-29
By reviewer2929
This item arrived very quickly even with it being the free super saver shipping (about 9 days after the day I placed the order). Very easy to use and once charged I was able to trim both my dogs overgrown nails without any fuss. They are used to having their nails ground professionally so they didn't need to be introduced to it, but this items works wonderfully. Cheaper to purchase than 1 grooming session for my dogs so it has already paid for itself. Will definitely recommend this product to others.

Dremel 767-01 6-Volt Two-Speed Alkaline MiniMite Rotary Tool

2010-07-29T08:58:00.003-07:00

Review Dremel 767-01 6-Volt Two-Speed Alkaline MiniMite Rotary Tool

Buy Cheap Dremel 767-01 6-Volt Two-Speed Alkaline MiniMite Rotary Tool From Here Now!
The Dremel MiniMite rotary tool is designed for drilling, sanding, shaping, detailing and other light-duty jobs. This compact tool operates on four AA Batteries (not included) and is a valuable tool to have on hand. It features two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank.
Readmore

Technical Details

- Lightweight and Compact - Ideal for performance for precision and control with small projects and crafts
- Two Speed - Simplicity os odeal for a variety of materials.
- Includes 5 accessories - Carbide Grinding Stone, 60 and 120 grit sanding bands, and felt polishing wheel.
See more technical details

"Works Great with PowerGenix 1.6 Volt Rechargeable Batteries" 2010-03-20
By Ed Harris (Madison, WI USA)
Instead of using disposable alkaline batteries with this, I recommend using the new Nickel Zinc rechargeable batteries made by PowerGenix (search Amazon). In contrast to NiMH and NiCad batteries, which are 1.2 volt, these are 1.6 volt batteries! I am starting to use these new batteries for every application that normally uses 1.5 volt disposable batteries.

"nifty little dremel" 2010-03-03
By threadeater (Boston)
I bought this drill because it takes (4) AA batteries and I needed something portable.

I have an old Dremel circa 1973 that I have to dismantle to change

bits and a new corded one, which has more power and is a nice tool for at home.

This little guy fits comfortably in my smallish hand and is pretty quiet.

It also stands upright on the table when you're not using it.

You don't need a tool to change bits.

I just got it in the mail today so I can't say how long the batteries last.

However, I didn't get a model with rechargeable batteries because

they are bigger, heavier and replacing the rechargeable battery is half the price of the tool.

My only wish is that like the green "golf" model, it came with a little storage bag.

I use my Dremels for detailed jewelry/art work.

"Another great cordless tool from Dremel" 2010-02-18
By Hyun Yu
This is my fifth Dremel tool, all of which are in perfect working order--I know, I know, call me a Dremel junkie. I have the original 750 Minimite, 750-02 Minimite, the cordless Stylus, and a corded 3956-02 MultiPro Super. I mainly use them for my modelmaking hobby, and all three cordless Dremels are found on my workbench and get regular use. So convenient and useful for the hobby, as well as various odd jobs around the house.

I bought this 767 Alkaline Minimite on a whim, thinking to myself that this would be a useful tool to have when I run out of juice on my other tools in the middle of a project. This of course is a fallacy--I mean, what are the odds that THREE cordless tools I already have will all run out of juice at the same time? Not to mention the corded MultiPro Super I have. But, those seemed like minor and irrelevant objections in light of getting a new toy. I *am* a Dremel junkie...

Unlike my two older Minimites, which use removable rechargeable Ni-Cad battery packs, and the cordless Stylus, which uses non-removable, internal lithium battery, the 767 Alkaline Minimite uses four AA batteries. On the battery pack label it specifically states: "Use 1.5V AA Alkaline batteries only." I was able to use rechargeable NiMH batteries such as those used widely for digital cameras, although those are rated at 1.2V each (as opposed to alkaline batteries' 1.5V). Thus you'll get 4.8V total, not 6V like the alkaline batteries. I'm not sure how much of a performance hit there is with using 4.8V NiMH batteries. I'm also not sure why the warning to use only alkaline batteries. Here's a blurb I found on the web at [...]. It must be true since it's on the internet, right? :-) Anyway:

"Q: Can NiMH batteries be substituted for alkaline batteries even though they are only 1.2 volts?"

"A: Yes, for most high drain electronic applications NiMH batteries are ideal substitutes and you needn't worry about the apparent voltage differences. Even though alkaline batteries are rated at a nominal 1.5 volts, they only deliver 1.5 volts when they are fully charged. As they begin to discharge the voltage of alkaline batteries continuously drops. In fact, over the course of their discharge, alkaline batteries actually average about 1.2 volts. That's very close to the 1.2 volts of a NiMH battery. The main difference is that an alkaline battery starts at 1.5 volts and gradually drops to less than 1.0 volts. NiMH batteries stay at about 1.2 volts for most of their discharge cycle."

I should note that when fully charged, the 1.2V NiMH batteries show a voltage of around 1.4-1.45V according to my multimeter.

Appearance-wise, the 767 Alkaline Minimite is very similar, if not identical, to the 750-02 Minimite that Amazon sells and which uses removable rechargeable Ni-Cad battery. You get a slightly higher speeds than the 750-02's 6,500 low and 13,000 RPM high speeds--the Alkaline Minimite has 7,000 low and 14,000 RPM high speeds. The tool shell is made of semi-translucent blue plastic. I don't know if it's my imagination, but the material used on the 750-02 Minimite seems a bit stronger than the Alkaline Minimite's. Maybe it's the plastic's translucency that's tricking my brain.

The 767 Alkaline Minimite comes with 5 accessories, and no batteries. The accessories are: Screw mandrel, silicon carbide grinding stone (cone-shaped), sanding mandrel with a drum, a spare drum, and a polishing wheel that screws on to the screw mandrel. It also comes with a 1/8" collet. The instruction booklet is technical and tells you mostly about the care and working of the tool, and very little about how to use the tool in various situations.

In use, the 767 Alkaline Minimite works just fine, as I've come to expect from the Dremel brand. The noise from the motor is on par with my 750-02 Minimite. The weight of the battery pack at the back of the tool (4.9oz) is about 20% heavier than the NiCad battery pack from the 750-02 Minimite (4.2oz). Overall weight is virtually identical versus the 750-02 Minimite, with the Alkaline Minite weighing 9.7oz with the batteries and the 750-02 weighing 9.3oz.

Overall, I'm pretty pleased with the 767 Alkaline Minimite. I mean, it's a cordless Dremel tool, what's there to not like? The only point I want to bring up is that of value. Here on Amazon, the 767 Alkaline Minimite sells for $26. For $3 more, you can get the 750-02 Minimite, which comes with a rechargeable battery and charger. Unless this is your only Dremel and you're worried about running out of juice in the middle of a project, it seems to me that it's a better value and sense to get the 750-02 with included rechargeable battery. But that's just me. On its own merit, the 767 Alkaline Minimite is a fine handheld cordless rotary tool.

Dremel Attachments & Accessories Collection

2010-07-29T08:58:00.001-07:00

Review Dremel Attachments & Accessories Collection

Buy Cheap Dremel Attachments & Accessories Collection From Here Now!

Readmore

Technical Details

1 1/2" Reinforced Cut Off Wheel Set

2010-07-28T15:29:00.001-07:00

Review 1 1/2" Reinforced Cut Off Wheel Set

Buy Cheap 1 1/2" Reinforced Cut Off Wheel Set From Here Now!

Readmore

Technical Details

1 1/4" Cut Off Wheel Set

2010-07-28T15:20:00.001-07:00

Review 1 1/4" Cut Off Wheel Set

Buy Cheap 1 1/4" Cut Off Wheel Set From Here Now!

Readmore

Technical Details

Reinforced Cut Off Wheels, 1 1/2"

2010-07-28T15:16:00.001-07:00

Review Reinforced Cut Off Wheels, 1 1/2"

Buy Cheap Reinforced Cut Off Wheels, 1 1/2" From Here Now!

Readmore

Technical Details

1 1/4" Cut Off Wheels

2010-07-26T18:25:00.001-07:00

Review 1 1/4" Cut Off Wheels

Buy Cheap 1 1/4" Cut Off Wheels From Here Now!

Readmore

Technical Details

Proxxon 29040 3/32" Piloted Beading Router Bit

2010-07-26T18:18:00.001-07:00

Review Proxxon 29040 3/32" Piloted Beading Router Bit

Buy Cheap Proxxon 29040 3/32" Piloted Beading Router Bit From Here Now!
Made from high speed steel, with 1/8" (3,2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300, Router Base OFV or the Router Table FT 300. Free-hand use of these cutters is extremely dangerous!
Readmore

Technical Details

Proxxon 29030 1/4" Core Box Router Bit

2010-07-18T07:22:00.001-07:00

Review Proxxon 29030 1/4" Core Box Router Bit

Buy Cheap Proxxon 29030 1/4" Core Box Router Bit From Here Now!
Made from high speed steel, with 1/8" (3,2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300, Router Base OFV or the Router Table FT 300. Free-hand use of these cutters is extremely dangerous!
Readmore

Technical Details

Proxxon 29038 1/8" Piloted Rabbeting Router Bit

2010-06-30T03:53:00.001-07:00

Review Proxxon 29038 1/8" Piloted Rabbeting Router Bit

Buy Cheap Proxxon 29038 1/8" Piloted Rabbeting Router Bit From Here Now!
Made from high speed steel, with 1/8" (3,2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300, Router Base OFV or the Router Table FT 300. Free-hand use of these cutters is extremely dangerous!
Readmore

Technical Details

Proxxon 29030 1/4" Core Box Router Bit

2010-06-09T07:59:00.001-07:00

Technical Details

Proxxon 29034 1/4" Plunge Router Bit

2010-05-28T09:54:00.001-07:00

Review Proxxon 29034 1/4" Plunge Router Bit

Buy Cheap Proxxon 29034 1/4" Plunge Router Bit From Here Now!
Made from high speed steel, with 1/8" (3,2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300, Router Base OFV or the Router Table FT 300. Free-hand use of these cutters is extremely dangerous!
Readmore

Technical Details

Proxxon 29042 3/16" Piloted Cove Router Bit

2010-05-28T09:48:00.001-07:00

Review Proxxon 29042 3/16" Piloted Cove Router Bit

Buy Cheap Proxxon 29042 3/16" Piloted Cove Router Bit From Here Now!
Made from high speed steel, with 1/8" (3,2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300, Router Base OFV or the Router Table FT 300. Free-hand use of these cutters is extremely dangerous!
Readmore

Technical Details

Proxxon 29026 3/16" Straight Router Bit

2010-05-28T09:46:00.001-07:00

Review Proxxon 29026 3/16" Straight Router Bit

Buy Cheap Proxxon 29026 3/16" Straight Router Bit From Here Now!
Made from high speed steel, with 1/8" (3,2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300, Router Base OFV or the Router Table FT 300. Free-hand use of these cutters is extremely dangerous!
Readmore

Technical Details

Proxxon 29036 1/8" Piloted Round Over Router Bit

2010-05-11T09:57:00.001-07:00

Review Proxxon 29036 1/8" Piloted Round Over Router Bit

Buy Cheap Proxxon 29036 1/8" Piloted Round Over Router Bit From Here Now!
Made from high speed steel, with 1/8" (3,2 mm) shanks, inverse ground flutes and maximum speeds up to 30,000 rpm in different profiles for optimal results. Note: These router cutters should only be used in machines or accessories such as the Shaper MT 300, Router Base OFV or the Router Table FT 300. Free-hand use of these cutters is extremely dangerous!
Readmore

Technical Details